Rb25 Inlet Manifold Mod

[ivor]

found this on www.skylinesaustralia.com it's got a nice plenum that bolts straight onto the bottom half the standard manifold take a look with out any other mods might be worth seeing about bringing a few over or see if we could get a club discount for buying on bulk
http://www.skylinesaustralia.com/for...owtopic=103450

[Spearmint]

TODDRb30GTR off of our other forum works at Thor-Racing and at my last visit he reliably informed me that he can convert the standard item to a front feed with less losses than the standard fit item with the FMIC that has all the pipework going across the radiator etc.

Not only that but his conversion distributes an even amount of charge to each cylinder helping to prevent 1 & 6 from generating it's usual faults and overheating.

Says he'll do it for £250-£300. I'm deffo considering it for my next visit at Thor.

[ivor]

yes mate thing is these are flow tested and only have a 2% loss across the six cylinders and not only that it looks a hell of a lot better as it bolts straight onto the bottom half

[Spearmint]

So with this item that bolts straight to the bottom half. In laymans terms it means not a big job to change?

[ivor]

it means you could probably do it in an hour without too much fuss it can be supplied as a kit or as seperates heres the company thats doing them shipping is a bit much but i reckon if you contact the company you could probably arrange shipping yourself http://www.uniqueautosports.com/