LinkBack URL
About LinkBacksMany thanksOriginally Posted by Flamby
what a fantastic read! I have just gone through the whole project and I am so impressed by your determination and by the quality of the end results
Look forward to watching how this develops!
Many thankswhat a fantastic read! I have just gone through the whole project and I am so impressed by your determination and by the quality of the end results
Look forward to watching how this develops!
Now, if my calculations are correct, when this baby hits eighty-eight miles per hour, you're gonna see some serious s***
Its been a little while as I have had a few issues recently, but yesterday I picked up my replacement block after having it bored out to 87mm, everything has been balanced and it spot on. The block itself needed a bit of cleaning up, but I am almost ready for the build now.
Started off by giving it a good wash
These pistons are the right ones this time around
Roughly about half way through
and finished
Now, if my calculations are correct, when this baby hits eighty-eight miles per hour, you're gonna see some serious s***
Wow.............is that sunshine?
Good work on the block, are you going to paint it?
If you think my attitude stinks, you should smell my fingers!!!!
I have given it a base coat of silver, close to the blocks original colour as I wanted to see what it would look like but I will more than likely go for matt black
Now, if my calculations are correct, when this baby hits eighty-eight miles per hour, you're gonna see some serious s***
Good work Andy
(I would go for the matt black on the block aswell mate)
With Power Comes Responsibility
Looking great Andy! Hopefully all goes well from here mate, and finally get to see the beast to its full potential
Awesome thread!
Bloody good work!
you'll need to get some oil back on the bores/bearing faces ASAP
Serious Performance Autos
01323 760076
andy..check all the welsh plugs carefully mate, use a screwy to stab them..best to find any bad ones now, acids and cleaning agents dont do them any good.
Anglesey, home of the R33 flymo
Looks like a good few hours work!
SKYLINE 25GTt ER34 - SPRINT - NISMO - BLITZ - ULTRALITE - FALKEN - SONY
Now, if my calculations are correct, when this baby hits eighty-eight miles per hour, you're gonna see some serious s***
new core plugs for what they cost is the way to go - imo
Not much has happened with the car for the last month, in fact it hasn't left the garageJust getting the money together to build and replace the engine. So I have turned my attention to the outside of the car for the moment and have started looking for a rear replacement bumper and a new Impul front bumper. I have just had these done by Knight Racer and the quality is superb, very impressed with them
Now, if my calculations are correct, when this baby hits eighty-eight miles per hour, you're gonna see some serious s***
Very nice Andy, it's hard to tell from the photo's, did they come painted?
I'm interested to see the fit once their fitted.
If you think my attitude stinks, you should smell my fingers!!!!
It's a belting looking machine for sure!
Can't believe I've never come across this GT-T thread before to be honest... Just been doing a search for RB26 internals into the NEO and stumbled here.
How do you rate the G4, Andy? I've only read good reviews, but would be nice to hear from a fellow GT-T'er... Loving the Link display too
All the best...
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
Bookmarks