bov and dump valves - Page 2 - Skyline Owners Club

smoothop · 9th July 2008, 12:01 AM

i get stalling with the blitz

**tommygtst** · 9th July 2008, 12:18 AM

i would try a hks then ,thats what i have and dont have any issues with it , i take it you cant adjust the blitz spring anymore to to tighten it

**Little Kez** · 9th July 2008, 01:46 AM

most people used the HKS SSQ, dad has one on his, the greddy one sounds really dodgey

smoothop · 9th July 2008, 12:20 PM

ti have the adjustment right out so the screw is all the way lossened. i thought putting this down will more stop the bov from working

**Moff** · 9th July 2008, 12:47 PM

Have a searchy, I've posted a couple of thereads about BOVs 'n' stuff

**tommygtst** · 9th July 2008, 01:21 PM

Quote:

Originally Posted by smoothop

ti have the adjustment right out so the screw is all the way lossened. i thought putting this down will more stop the bov from working

no it wont sop it working ,it will just take a bit more boost , if its to loose the spring will leak you have to find a balance that the car will run properly with

**Bubble** · 9th July 2008, 02:27 PM

I never had a stalling issue with an HKS SSQV on either Skyline. Honey still has hers, though I now have a Tial which flows a bit more air with my big power.

Anthonyskyline · 19th July 2008, 10:30 PM

hi does the standard bov fail or is every one changing there bov to get that great sound when changing gear

**Richf** · 20th July 2008, 09:26 AM

Quote:

Originally Posted by Anthonyskyline

hi does the standard bov fail or is every one changing there bov to get that great sound when changing gear

The stock BOV is rumoured to leak at higher hp levels , some say above 1 bar and others reckon they can take more but most change them for the noise

**CrispyTKD** · 7th September 2008, 10:39 AM

i bought a Blitz SSBOV from ebay its in mint condition,it was marked up for the R32 and now ive found out it cam off an R33,anychance i could alter it to suit mine? im just hoping theres a way round it so i havent just wasted my money.

smoothop · 8th September 2008, 11:28 AM

if its off a rb 25 should be the same fitment

but on another not found out that my blitz wasnt dumping right. bought a second hand hks from japperformaceparts.co.uk for £150 sounds awsome and no stalling problems

**CrispyTKD** · 8th September 2008, 07:43 PM

actually now i look at it,dont even think its from a 33 looks more like a subaru fit.hmm not good,shud still be able to alterit tho i hope.just fit it further down rather on than on the turbo pipe?

9th July 2008, 12:01 AM	#16
smoothop Skyline Enthusiast Registered User Join Date: Dec 2007 Location: Ashford, Kent Posts: 221	i get stalling with the blitz
	__________________ http://img216.imageshack.us/img216/5...1766te1.th.jpg

9th July 2008, 12:20 PM	#19
smoothop Skyline Enthusiast Registered User Join Date: Dec 2007 Location: Ashford, Kent Posts: 221	ti have the adjustment right out so the screw is all the way lossened. i thought putting this down will more stop the bov from working
	__________________ http://img216.imageshack.us/img216/5...1766te1.th.jpg

9th July 2008, 12:47 PM	#20
Moff SNOW !!! :) Area Rep Membership No. 105 Join Date: Jan 2006 Location: Wokingham / Ulm Germany County: Berkshire Drives: 33 GTS-t Spec 2, Stagea, Clio Posts: 7,289	Have a searchy, I've posted a couple of thereads about BOVs 'n' stuff
	__________________ Coming in 2009 after winter Hiberation for the car, Carbon, Cage, New Seats Car Meets in BERKS

9th July 2008, 02:27 PM	#22
Bubble Club Treasurer & Essex Rep. Administrator Membership No. 107 Join Date: Jan 2006 Location: Colchester / Braintree County: Essex Drives: R34GTT / Pajero / X-Trail DCi Posts: 9,016	I never had a stalling issue with an HKS SSQV on either Skyline. Honey still has hers, though I now have a Tial which flows a bit more air with my big power.
	__________________ R34GTT RB30 with a T04Z - 675bhp / 574lbs @ 1.5 bar 12.28 @116 TOTBV Skyline Owners Club - Essex Meet Here

8th September 2008, 11:28 AM	#26
smoothop Skyline Enthusiast Registered User Join Date: Dec 2007 Location: Ashford, Kent Posts: 221	if its off a rb 25 should be the same fitment but on another not found out that my blitz wasnt dumping right. bought a second hand hks from japperformaceparts.co.uk for £150 sounds awsome and no stalling problems
	__________________ http://img216.imageshack.us/img216/5...1766te1.th.jpg

9th July 2008, 12:18 AM	#17
tommygtst Skyline Owners Club Club Member Membership No. 781 Join Date: Jun 2008 Location: perth Drives: gtst Posts: 94	i would try a hks then ,thats what i have and dont have any issues with it , i take it you cant adjust the blitz spring anymore to to tighten it

9th July 2008, 01:46 AM	#18
Little Kez Skyline Owners Club Club Member Membership No. 759 Join Date: Jan 2006 Location: North Wales County: Gwynedd Drives: Mitsubishi Colt Posts: 1,827	most people used the HKS SSQ, dad has one on his, the greddy one sounds really dodgey

19th July 2008, 10:30 PM	#23
Anthonyskyline Skyline Enthusiast Registered User Join Date: Jun 2008 Location: Gillingham Drives: Rover 420 gsdi diesel :D Nissan Skyline R33 GTS-T Posts: 58	hi does the standard bov fail or is every one changing there bov to get that great sound when changing gear

7th September 2008, 10:39 AM	#25
CrispyTKD Skyline Owners Club Club Member Membership No. 807 Join Date: Aug 2008 Location: Bradford County: West Yorkshire Drives: Skyline R32 GTs-T, Transit van,600 Bandit Posts: 765	i bought a Blitz SSBOV from ebay its in mint condition,it was marked up for the R32 and now ive found out it cam off an R33,anychance i could alter it to suit mine? im just hoping theres a way round it so i havent just wasted my money.

8th September 2008, 07:43 PM	#27
CrispyTKD Skyline Owners Club Club Member Membership No. 807 Join Date: Aug 2008 Location: Bradford County: West Yorkshire Drives: Skyline R32 GTs-T, Transit van,600 Bandit Posts: 765	actually now i look at it,dont even think its from a 33 looks more like a subaru fit.hmm not good,shud still be able to alterit tho i hope.just fit it further down rather on than on the turbo pipe?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
BOV (dump valve)	Bubble	Parts For Sale	4	31st December 2008 09:38 AM
Teccy info on BOV's / Dump Valves	Moff	Technical FAQ'S	7	10th February 2008 09:49 AM
dump valve ???shall i or not??	sanders1974	Skyline Questions	28	10th March 2007 09:19 AM