My new toy !!

[skyline alan]

Very nice evo. i just sold my 4 for the 34 gtt i do miss the evo it was so much fun. Are you a member of the mlr yet? its a good club. Alan

[D'BOY]

very nice!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[Little Kez]

Thank mate.

I just used etch primer, if you go too thick with the paint then you'll affect its smooth operation. The key is to make sure its perfectly clean.

You don't need heat resistant paint on the rocker cover, it doesn't get that hot (although hot to touch).

Again, its just the preperation thats important.

Normal paint was used on the rocker covers on my R33 and also on the Evo with no problems.

cheers

Andy

Nice one mate. im going to spray mine after christmas! let you know how things go!
i have been trying to find a paint code for cadbury purple, its a hard colour to find!

[wh0s_the_daddy]

Very nice evo. i just sold my 4 for the 34 gtt i do miss the evo it was so much fun. Are you a member of the mlr yet? its a good club. Alan

been a member for ages mate

[wh0s_the_daddy]

I haven't done a lot to be honest due to xmas and my new puppy, but i've managed to get some bits back from the powdercoater, still a lot more to send to him...

FUEL TANK



FUEL TANK HEAT SHIELD





REAR SUSPENSION BEAM





REAR BRAKE CALIPERS

( just got to fit new seals and brembo decals, then a coat of laquer & braided lines ).





FRONT H BRACE



and loads more...

Also removed the inlet manifold so it can be polished or powdercoated (not made my mind up yet), the exhaust manifold and turbo are also off - the nuts came off very easily ( I soaked them with WD40 for a few days ) which was nice. I'm going to uprate the exhaust manifold to a tubular manifold.







I'm whipping the engine out as soon as the car's back on its wheels and the block and everything else will be painted.

I'm taking all the suspension arms to the powdercoater next week and once they've been done i'll be fitting polybushes and new ball joints, drop links and ARB.

The arms are being done silver just like the fuel tank heat shield, the hubs are red, the brake disc shield silver.

The front engine mount beam and engine mount bush carriers are going to be silver too.

The power steering pot is being chromed (cheaper option than a Spec-R one :blush

There's lots to take to him....







As soon as i get all the parts back from the powdercoater and all the nuts and bolts back from the platers then i'll start to re-assemble the rear end once i've painted the floor white - SOON !!!

[wh0s_the_daddy]

I'm DEFINATELY going to finish off painting the underside next week and make a start of re-fitting some of the parts as my garage looks like a parts store at the moment.

I got some bits back from the chromers today ( I know chrome isn't everyones cup of tea ), seeing as i'm making the underside like new I thought i'd make every nut and bolt like new too, chrome is dead easy to keep clean, just give it a wipe over - plus its very hard wearing.

So here's the parts i got back, he's got a load more nuts and bolts to do for me and a few more bits which i'll post up when i get back.

I got the fuel filler pipe done so it will last forever now...







Fuel filler pipe protective shield...







Diff brackets...





Diff hanger washers ( rubber still attached to other side )...



Thermostat housing....and cam position sensor cover.



Rad brackets....



Exhaust rubber mounting bracket ( bolts to rear suspension beam )..



ARB bush mounts and front intercooler pipe mounting bracket....



Engine damper brackets...

[wh0s_the_daddy]

All the bolts that hold the rear suspension and beams on, inc camber bolts / washers and nuts...











selection of brackets that hold the brake pipes to car aswell as handbrake cable brackets and AYC line brackets....



Speaking of AYC lines, I got the braided AYC lines from HEL Performance and will test fit them to the pump tomorrow, also the high pressure line for the power steering pump... great quality !!

The power steering line had to utilise the existing fittings as they are specific to mitsi - they look brill.

AYC lines...







Power steering line...







updates as I re-fit things....

cheers

Andy

[skyliner9999]

looks like you have a lot of work ahead of you mate.

will look the dogs danglies when its all back together!!!

keep up the good work

[Little Kez]

hurry up and finnish i wanna see it al done good stuff fella

[Richf]

Man!! there is some moneys worth of chroming there !!

[Moff]

I still think you have OCD issues..... but I like it

Carry on

[wh0s_the_daddy]

At last i've managed to finish off the painting of the rear end, rear arches and the whole of the floor pan (well i've put 2 good coats on, just one more coat and a couple of coats of laquer to go ).

I'm very pleased with the results, I can start to put things back together in a couple of weeks....

FLOORPAN...











REAR - fuel tank area





SPARE WHEEL WELL....



SUSPENSION MOUNTS.....





AYC PUMP LOCATION.....





AND OTHER SIDE...

[wh0s_the_daddy]

HERE'S A REMINDER TO WHAT IT WAS LIKE BEFORE I STARTED...













A vast improvement I think, still a way to go yet though, i'll keep chipping away at it....

cheers....