Oil cooler fitting - Skyline Owners Club

**GTMike** · 12th September 2008, 07:00 PM

I've finally got the time to make a start on my car again so i'll be soon updateing my project thread as work progresses.
What i need to know is I've just bought a Mocal oil cooler for my 34 and was wondering if it was an addition to , or a replacment to the standard one. Do i remove the standard one and connect the water pipes and replace with the Mocal one , or do i just take off the filter and put in the sandwich plate and leave the standard one there.

Any ideas / thoughts

mike

**Mendoza** · 12th September 2008, 08:22 PM

Honey has had one of these kits fitted to hers, so am sure her and Bubble will be along soon

**Bubble** · 12th September 2008, 11:29 PM

Leave the standard one on there, put the sandwich plate on top, followed by the oil filter. It is very tight down there and make sure that you don't overtighten the sandwich plate fitting, as a few people have sheared off the standard housing

12th September 2008, 07:00 PM	#1
GTMike Skyline Owners Club Club Member Membership No. 775 Join Date: Sep 2006 Location: Beverley ,Hull County: East Yorkshire Drives: Veilside GT1 R34, RB25 MK1 escort Posts: 145	Oil cooler fitting I've finally got the time to make a start on my car again so i'll be soon updateing my project thread as work progresses. What i need to know is I've just bought a Mocal oil cooler for my 34 and was wondering if it was an addition to , or a replacment to the standard one. Do i remove the standard one and connect the water pipes and replace with the Mocal one , or do i just take off the filter and put in the sandwich plate and leave the standard one there. Any ideas / thoughts mike
	__________________ anyone can drive in a straight line.........

12th September 2008, 08:22 PM	#2
Mendoza N'hants/Beds/Herts/Bucks Rep Area Rep Membership No. 686 Join Date: Feb 2007 Location: Cities of Gold County: Bedfordshire Drives: Tommy Kaira 25RSkoda Octavia L&K Posts: 1,712	Honey has had one of these kits fitted to hers, so am sure her and Bubble will be along soon
	__________________ Need a Club Spec Sheet? Project 25R From Herts, Beds, Bucks? From Northants? JAE 2008 Best Presented R34 Winner Serious Performance Autos / Abbey Motorsport - 346BHP ATH @ 1.3bar

12th September 2008, 11:29 PM	#3
Bubble Club Treasurer & Essex Rep. Administrator Membership No. 107 Join Date: Jan 2006 Location: Colchester / Braintree County: Essex Drives: R34GTT / Pajero / X-Trail DCi Posts: 9,016	Leave the standard one on there, put the sandwich plate on top, followed by the oil filter. It is very tight down there and make sure that you don't overtighten the sandwich plate fitting, as a few people have sheared off the standard housing
	__________________ R34GTT RB30 with a T04Z - 675bhp / 574lbs @ 1.5 bar 12.28 @116 TOTBV Skyline Owners Club - Essex Meet Here

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Oil Information	Squeak	Technical FAQ'S	9	13th June 2008 01:56 AM
16 Important OIL questions and answers	oilman	Technical FAQ'S	0	14th March 2008 06:11 PM
16 important OIL questions answered!	oilman	Skyline Questions	0	23rd January 2008 01:55 PM
Answers From The Oil Expert Part # 2	oilman	Opie Oils	0	18th October 2007 11:32 AM
Answers From The Oil Expert Part # 2	oilman	Technical FAQ'S	0	18th October 2007 11:32 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)