Results 1 to 15 of 15

Thread: Chris' R34 GTT Series 2

  1. #1
    Skyline Enthusiast Registered User
    Join Date
    Apr 2010
    Location
    Norwich,Norfolk
    Posts
    74

    Chris' R34 GTT Series 2

    Time was drawing in closer for when i break my Supercharged MX5 ready to fund an R34 GTT. I wouldnt be a true car enthusiast if i wasn't already looking for cars on the interweb. My fingers were starting to hurt after refreshing various selling and auction sites here and Japan too often.

    One car I kept being drawn back to was a white Series 2. It ticked all the boxes for what i was looking for, except it was the facelift front bumper that was preventing me from looking deeper into the details. So i messaged the seller and asked for a few more details and photos, very quick responses and the amount of photos asked on request was overwhelming.

    Was it worth the 7hr round trip to go look at it, to potentially not like it? If it was as clean as it was in the photos, something major must have had been up with it if i was to walk away. Luckily this wasn't the case, infact the car was even better in person. After a test drive and a good poke around i really couldnt fault the car except for a knock on the driver side rear. So with an offer made he accepted and I drove away extremely happy! The 170ish mile drive home was faultless and i look forward to digging in and putting my own stamp on it.

    It would have been rude to not get some photos, especially with the MX5

    Nissan Skyline R34 GTT Series 2
    RB25DET NEO 6
    Manual Transmission

    Imported in 2016 by IBE Cars in Huddersfield
    Resprayed in original Pearl White in 2017

    Its stock except for a custom turbo back exhaust, HKS mushroom filter and aftermarket stereo
























  2. #2
    Skyline Enthusiast Registered User
    Join Date
    Apr 2010
    Location
    Norwich,Norfolk
    Posts
    74



















  3. #3
    Skyline Enthusiast Registered User GTR-John's Avatar
    Join Date
    Jan 2017
    Location
    Helensburgh
    Posts
    124
    Images
    13
    Looking at the pics, I'd say good choice mate. Car looks spotless.

  4. #4
    Skyline Enthusiast Registered User
    Join Date
    Apr 2010
    Location
    Norwich,Norfolk
    Posts
    74
    Thanks John I'm very happy with the purchase!

  5. #5
    Skyline Enthusiast Registered User
    Join Date
    Apr 2010
    Location
    Norwich,Norfolk
    Posts
    74
    Got the car back from H & S performance in Norwich who have done an amazing job on the Skyline the past couple of days

    Oil Change
    Spark Plugs
    Fuel Filter
    Japspeed Radiator
    Thermostat
    Drive Belts
    Cambelt & Tensioners
    Waterpump
    Coolant change
    Gearbox Oil change
    Diff Oil change
    Brake Fluid change

    Meister R Zeta CRD Coilovers
    Shorter front drop links
    Wheel arches and suspension turrets undersealed

    A-Tech 17" wheels back from powder coaters (done by SW Wheels) tyres swapped over and fitted along with new wheel nuts

    Full alignment

    Car drives completely different now and looks awesome!



















    Got some things coming from Japan aswell as another road trip planned for this weekend. Will keep you updated when i receive them

  6. #6
    Skyline Enthusiast Registered User
    Join Date
    Apr 2010
    Location
    Norwich,Norfolk
    Posts
    74
    Why buy aftermarket clear side repeaters when you can just remove the orange lense yourself for free!



    With the purchase of the Blitz FMIC it was time to find an Altia bumper,this seemed abit more tricky than i first though. Luckily i found one only a couple of hours away, and it was en route on my holiday to Cornwall last week!



    While down in Cornwall we took a trip over to Devon and visited the guys and girls at Torque GT. They had the HKS SSQV Blow off Valve on offer, so would have been rude not to grab one while i was there. I also purchased a speedo converter too, which i'll get booked in with my local garage to get it fitted soon.



    With the car now serviced and the cambelt changed, i wanted to record the date like they do over in Japan. So i contacted Rajikaru who supply period correct japanese stickers, and they kindly replicated the sticker for me and have now added it to their store! I also purchased some other stickers to go with it.











    We also got both cars out for a drive Sunday evening


  7. #7
    Skyline Enthusiast Registered User
    Join Date
    Apr 2010
    Location
    Norwich,Norfolk
    Posts
    74
    It was busy day today for me and the fiance as we cracked on with doing little jobs on the car. Its those simply, low cost mods that make a little difference overall.

    The engine cover got prepped and painted in silver. I was originally going to do it red, but thought it might have been too much, so kept with silver to keep it more factory looking. The text was painted red and i started to draw a black border with a sharpie but it decided to dry up, so that needs finishing at some point







    The stock strut brace got a lick of paint too



    I also gave the larger areas of the engine bay a quick de-grease along with the fitting of some red dress up bolts



    We also gave the calipers a lick of paint, you may have noticed a colour scheme going on...


  8. #8
    Skyline Enthusiast Registered User
    Join Date
    Apr 2010
    Location
    Norwich,Norfolk
    Posts
    74
    My second package from Japan had arrived, my replacement OEM steering wheel. This is fantastic condition compared to the one fitted to the car. The only problem was (and i didnt notice until i took the photos) was its actually from an Auto car, i didn't originally see the buttons in the advert on Yahoo Auctions,oops!

    Before



    After (before fitting)





    Replaced the dash cluster bulbs to LED, photos don't do them justice. Just need to get a front interior light bulb to complete the interior





    It was my birthday last Wednesday, my fiance very kindly purchased some LED tail lights and also purchased a personalised number plate along with my parents (i knew about the plates as i found it lol)



    Last Sunday i organised a photoshoot with some friends who have japanese cars, here are some of the solo photos i got of the GTT


















  9. #9
    Skyline Enthusiast Registered User
    Join Date
    Apr 2010
    Location
    Norwich,Norfolk
    Posts
    74
    Not much has been happening and i didn't want to just post single photos.

    Finally got the Altia bumper painted and fitted, along with some clear indicator units and chrome bulbs. Its transformed the front end and looks alot better! I'm glad i decided to colour code the centre bar and not left it black.





    The factory ceramic turbo doesn't like a bar of boost, most say around 11-12psi max is safe. After some research i decided to go for a Greddy Profec OLED boost controller to up the current boost a tad. Also hoping it'll come into boost smoother as its a little bit 'choppy'.

    I didn't like the mount that's supplied so decided to make something. I started off with making a blank for the ash tray



    I wanted a flush look and have it removable if there was ever a problem or i didn't like it. We recently had some new magnetic phone holders come in at work so I decided to use one for the mount. I cut the ball & socket mounting off and was left with just the magnetic pad.





    And stuck the other half of the magnet on the back of the controller



    With the hole drilled for the wiring it was ready to be 'test fitted'. I originally fitted a wiring grommet but I didn't take into consideration that it protruded above the surface, so s****ped that idea



    To make it secure onto the trim i used two small screws in the top corners. Double sided tape would have made it look cleaner, but I didn't want it coming off while i'm driving.







    With it refitted it doesn't look too out of place in the cabin, quite pleased with the result! I've also fitted and wired up the AEM gauges from the MX5. I just need to fit the oil sandwich plate and sensor along with getting a boss welded into the exhaust for the AFR gauge.


  10. #10
    Skyline Owners Club Registered User skid's Avatar
    Join Date
    Jul 2006
    Location
    Kingdom of Surrey
    Posts
    1,677
    Some nice work going on there. They do look nice in white.
    Quote Originally Posted by Gordon View Post
    Have said it before but will say it again , Gills Arse is mint

  11. #11
    Skyline Enthusiast Registered User
    Join Date
    Apr 2010
    Location
    Norwich,Norfolk
    Posts
    74
    In August I ordered a new set of wheels, I wanted a set of these for the MX5 but they don't make them wide enough in a 15. So i'm very happy to be able to have a set on the Skyline





    Choosing a wheel design was difficult enough, let alone deciding which fitment to get. I decided on 18x8.5 ET30 and 18x9.5 ET30, playing it safe due to the arches are original and mint, would be a shame to ruin them because of the offset being lower.

    I believe Nismo recommend this fitment for the GTT, so that was some reassurance

    Colour choice was also another challenge, the current bronze wheels look awesome against the pearl white and I had my head set on that. But then i saw the GT Silver was an option and well....you can see from the photos that i made the right decision (or did i?)



    This is one of the rear wheels to help show the concave, the fronts are alot more straight spoked due to the width



    I wont be getting tyres for a couple of months, show seaon is over here in the UK and the car won't be driven much when the salt starts to be spread in the coming months.

  12. #12
    Skyline Enthusiast Registered User
    Join Date
    Apr 2010
    Location
    Norwich,Norfolk
    Posts
    74
    With the bodywork being in mint condition (except the difference in colour on some panels due to the pearl) my attention would be under the bonnet. I can't afford a full forge build,top mount turbo etc so went for a cheaper route. I've been collecting parts for a couple of months and now I'm at a stage where i can post about it.



    Stock Turbo Stage 3 Hybrid (spec below) (Rebuilt by Universal Turbos)
    Genuine Gasket Set
    Apexi Power FC
    Z32 MAF
    R35 GTR 570cc Injectors
    Walbro 255 Fuel Pump
    Blitz FMIC
    NGK BKR7E Plugs
    Splitfire Coilpacks
    Competition Clutch Stage 2 (supplied by Conceptua Tuning)
    Lightened Flywheel
    Braided Clutch line







    Re-Profiled Compressor Cover
    T38 Compressor Wheel
    360 Degree Thrust Bearing
    T3 Billet Backplate Modified
    T3 Bearing Housing Modified
    Hi-Temp Turbine End Piston Ring Seal
    T38 Turbine Wheel
    Re-Profiled Turbine Housing
    Ported Wastegate and Larger Poppet Valve
    1 Bar Actuator
    Up-Rated Actuator Bracket

    My aim is 400hp,would be over the moon if it was more

    I also have a Tomei turbo elbow on order through Nengun Performance

  13. #13
    Skyline Enthusiast Registered User
    Join Date
    Apr 2010
    Location
    Norwich,Norfolk
    Posts
    74
    Nothing happens for weeks and all of a sudden everything happens at once lol

    The new tyres for the Work wheels arrived and i didn't waste any time getting them mounted and fitted to the car. The front ride height is left untouched from the 17s, the rears were raised 20mm (its still veeeery close to the arch lip)

    I think playing it safe with the offset of 30 was a wise decision, it may not be the 'fitment' that kids nowadays wanna see, but i think its perfect

    Not long after purchasing the car, i already had a vision of what i'd like the car to look lilke. My very first car/project was a red Nissan Micra K11, one of the things i loved about that was the Nismo livery. That car taught me alot of cars in general especially thinking outside the box when it came to modifying. I knew the livery would work well on the R34 so it had to be done.



    A big thank you to Unique Signs & Graphics in Norwich for designing it all from scratch and for fitting it. These were also the guys who designed and fitted the HKS livery on my MX5

















    I also tried out some coloured smoke grenades, I'll be having another go at night at some point






  14. #14
    Skyline Enthusiast Registered User
    Join Date
    Apr 2010
    Location
    Norwich,Norfolk
    Posts
    74
    No major updates just yet, only more photos
































































  15. #15
    Back on the skyline wagon again Area Rep Sukairain's Avatar
    Join Date
    Mar 2009
    Location
    Basingstoke
    Posts
    4,369
    Images
    37
    Looks like a good example and good work sofar, that MX5 im sure ive seen at a few shows
    スカイラインへの情熱

    passion for skylines

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •